被nano编辑器折腾了半天,收藏一下吧。省得以后到处找 我们以后基本都需要编辑文件来实现不同的设置,那么我们用什么来设置配置文件呢,用编辑器,就好比windows下的记事本和写字板,我们今天就来讲一下debian的默认编辑器----nano 首先我们在网络上看看有没nano的资料 网络上很少有nano的资料,那么我就来 给大家讲解一下nano的使用吧 就以编辑网络配置文件为例子吧 GNU nano 1.2.4,nano的版本 File: /etc/network/interfaces打开的文件的绝对地址 下面就是打开的文件的内容 # This file describes the network interfaces available on your system # and how to activate them. For more information, see interfaces(5). # The loopback network interface auto lo iface lo inet loopback # The primary network interface auto eth0 iface eth0 inet static address 192.168.254.20 netmask 255.255.255.0 network 192.168.254.0 broadcast 192.168.254.255 gateway 192.168.254.254 # dns-* options are implemented by the resolvconf package, if installed dns-nameservers 202.103.0.117 202.103.24.68 [ Read 17 lines ] ^G Get Help ^O WriteOut ^R Read File ^Y Prev Page ^K Cut Text ^C Cur Pos ^X Exit ^J Justify ^W Where Is ^V Next Page ^U UnCut Txt ^T To Spell 这些是帮助栏目,呵呵^G表示ctrl+g一起按,呵呵 ^G Get Help表示同时按ctrl和G,就是调出帮助菜单 我们来试一下 我按 了一下就调出了帮助菜单了,我下面就直接把快捷键表给大家,大家试试吧 一直以来vi都被人们说是最强大的编辑器,但gentoo和debian选择nano做了默认的编辑器 freebsd选择ee做了默认的编辑器,我相信在专业人士眼睛里面freebsd和redaht比较起来, redhat基本没什么可以炫耀的,为什么他们不选择vi呢,因为vi操作比较复杂 而所谓的简单编辑器nano就简单,非常容易上手,说是简单编辑器 其实一点都不简单,只不过是nano谦虚一下罢了 这里声明一下^表示键盘上的ctrl键,上个只要是做过编程的朋友应该都清楚,^G表示同时按下ctrl和g (F1)表示按(F1)也是一样的 ,M-表示使用alt+后面的键 ^G ==F1) Invoke the help menu 调用帮助菜单 ^X ==(F2) Close currently loaded file/Exit from nano 退出 ^O ==(F3) Write the current file to disk == ^O WriteOut 保存 然后回车就保存了 ^J ==(F4) Justify the current paragraph 调整当前段落(配置文件的不要用这东西,格式一下就出问题了哦) ^R ==(F5) Insert another file into the current one 插入其他的文件到当前的文件,而且查找文件的时候支持tab ^W ==(F6) Search for text within the editor 查找 ^Y ==(F7) Move to the previous screen 上一屏幕 ^V ==(F8) Move to the next screen 下一屏幕 ^K ==(F9) Cut the current line and store it in the cutbuffer 裁减当前一排并保存在缓冲区 ^U ==(F10) Uncut from the cutbuffer into the current line 将缓冲区的东西粘贴到此 ^C ==(F11) Show the position of the cursor 显示光标位置 ^T ==(F12) Invoke the spell checker, if available 调用拼写检查程序 ^P Move up one line 向上移动一行 ^N Move down one line 向下移动一 ^F Move forward one character 向前移动光标一格 ^B Move back one character 向后移动光标一格 ^A Move to the beginning of the current line 移动到当前行的开头 ^E Move to the end of the current line 移动到当前行的末尾 ^L Refresh (redraw) the current screen 刷新当前屏幕 ^^ (M-A) Mark text at the current cursor location 标记文本 ^D Delete the character under the cursor 删除光标后一个字母 ^H Delete the character to the left of the cursor 向左边删一个字母 ^I Insert a tab character 插入一个tab值 ^/ (F14) (M-R) Replace text within the editor 查找并且替换 ^M Insert a carriage return at the cursor position 插入一个回车 ^_ (F13) (M-G) Go to a specific line number 跳转到某行 ^Space Move forward one word 前进一个单词 M-Space Move backward one word 后退一个单词 M-] Find other bracket 搜索下一个括号 M-< Open previously loaded file 打开先前加载的文件 M-> Open next loaded file 打开下一个加载的文件 M-C Constant cursor position enable/disable M-I Auto indent enable/disable 是否首行缩进 M-Z Suspend enable/disable 是否悬挂 M-X Help mode enable/disable 帮助模式 M-M Mouse support enable/disable 鼠标支持 M-Y Color syntax highlighting enable/disable 语法加亮 这个就是退出了哦 好了nano 的编辑器就说这样多了 然后我们来说一下基本的几个配置文件以及地方 首先是打开命令行高效输入的位置 看到了高级的命令行补全,连软件包的名字都不需要记了哦,呵呵,是不是很爽哦 怎么ls没颜色了,你们是不是在redhat里面看到过颜色啊,那我们来改 看到了没,兰色是目录,白色是文件,绿色是可以运行的文件 cnrot:/# ll -bash: ll: command not found 告诉我们ll没这个命令 那我们来做一个自己定义的命令吧 记住要注销才生效,不需要重新启动的哦 看到了没 看到了没,这是自己定义命令哦 好了,我现在 给大家说几个文件的位置吧 怕大家找不到 首先是网络配置文件/etc/network/interfaces GNU nano 1.2.4 File: /etc/network/interfaces Modified # This file describes the network interfaces available on your system # and how to activate them. For more information, see interfaces(5). # The loopback network interface auto lo iface lo inet loopback # The primary network interface auto eth0 iface eth0 inet static address 192.168.254.20 netmask 255.255.255.0 network 192.168.254.0 broadcast 192.168.254.255 gateway 192.168.254.254 # dns-* options are implemented by the resolvconf package, if installed dns-nameservers 202.103.0.117 202.103.24.68 安装源配置文件 GNU nano 1.2.4 File: /etc/apt/sources.list #deb file:///cdrom/ sarge main deb cdrom:[Debian GNU/Linux 3.1 r0a _Sarge_ - Official i386 Binary-1 (20050607)$ deb http://debian.cn99.com/debian/ stable main deb-src http://debian.cn99.com/debian/ stable main deb http://security.debian.org/ stable/updates main contrib