使用cmd命令手动、自动启动和禁用服务

    技术2022-05-11  21

    使用命令行启动服务 在cmd下可有两种方法打开,net和sc,net用于打开没有被禁用的服务,语法是: net start 服务名                        启动 net start 服务名                                                停止 net stop 服务名net stop 服务名 用sc可打开被禁用的服务,语法是: sc config 服务名 start= demand    //手动 sc condig 服务名 start= auto      //自动 sc config 服务名 start= disabled //禁用 sc start 服务名 sc stop   服务名 注:1)服务名不一定是你在服务面板看到的那个名,例如,你要打开被禁用的telnet服务,sc config telnet start= auto,报错:[SC] OpenService FAILED 1060,因为telnet的服务名不是telnet而是tlntsvr, sc config tlntsvr start= auto     就OK了,在服务面板里查看telnet属性,从可执行文件的路径里可看到服务程序名,即命令中的服务名。[在服务中点击服务名称右键属性:有项叫:服务名称,这个就是需要的 "服务名",

    如:

    @echo off sc config MSSQLSERVER start= autoecho. & pause

    ]   

    2)start=后面有空格,少了就有错 sc.exe命令功能列表:  注:以下命令中。=号后面都有一个空格,=号前面没有空格!   1.更改服务的启动状态(这是比较有用的一个功能)      2.删除服务(除非对自己电脑的软、硬件所需的服务比较清楚,否则不建议删除任何系统服务,特别是基础服务)     3.停止或启动服务(功能上类似于net stop/start,但速度更快且能停止的服务更多)   具体的命令格式如下:     修改服务启动类型的命令行格式为(特别注意start=后面有一个空格)     sc config 服务名称 start= demand(设置服务为手动启动)      sc config 服务名称 start= disabled(设置服务为禁用)      停止/启动服务的命令行格式为      sc stop/start 服务名称      注意:平时常接触的都是服务的显示名称,而以上所指是服务名称,都可以在控制面板->管理工具->服务里面,双击对应的服务来查询。     先举例说明一下具体的设置方法:      如设置远程注册表服务为手动其格式为      sc config RemoteRegistry start= demand      设为禁用的格式为:   sc config RemoteRegistry start= disabled      停止服务则格式为:      sc stop RemoteRegistry      首先把自己所需设置的服务名称查到之后,按照上面的格式做成批处理文件,重装系统之后只要运行批处理文件即可。     以下是我的设置,以XpSp2为蓝本,可比对所用的系统进行增删和修改。注:未加入XpSp2的自动更新、安全中心、防火墙。    sc config Alerter start= demand      sc config TrkWks start= demand      sc config helpsvc start= demand      sc config policyAgent start= demand      sc config dmserver start= demand      sc config WmdmpmSn start= demand      sc config Spooler start= demand      sc config RemoteRegistry start= demand      sc config NtmsSvc start= demand      sc config seclogon start= demand      sc config Schedule start= demand      sc config WebClient start= demand      sc config W32Time start= demand      sc config WZCSVC start= demand   sc config ERSvc start= demand      sc config Themes start= demand      sc config FastUserSwitchingCompatibility start= disabled      sc config Messenger start= disabled      sc config protectedStorage start= disabled   sc config SSDpSRV start= disabled      sc config TermService start= disabled      sc config ShellHWDetection start= disabled      如果需要立即关闭服务也可把以下代码跟在上面的代码之后   sc stop W32Time      sc stop ShellHWDetection      sc stop TrkWks   sc stop helpsvc   sc stop dmserver   sc stop policyAgent      sc stop Spooler      sc stop RemoteRegistry      sc stop seclogon      sc stop Schedule      sc stop WZCSVC   sc stop ERSvc      sc stop Themes      sc stop FastUserSwitchingCompatibility      sc stop protectedStorage      sc stop SSDpSRV      sc stop WebClient      最后把修改好之后的代码存为services.cmd,在以后进行服务设置时,直接运行事先保存好的批处理文件就可以做到事半功倍了。     看到这里,使用Win2000的朋友也不必失望,sc.exe这个命令行工具对Win2000同样适用,可从装有WinXp或者Win2003的机器里面拷贝sc.exe文件,与保存好的批处理文件放在一起,然后执行批处理文件即可。     对注册表比较熟悉的朋友可能会想到用注册表来设置服务的启动类型,这也是一种可行的方法,本身却有着内在不足。原因是服务启动类型在注册表中对应的键值较长且分散,进行整理不方便直观且易错漏,所以这种方法比较适用于无人值守的安装时使用。

    使用案例:

    在命令行下启动自动更新服务:

    C:/>sc config wuauserv start= auto[SC] ChangeServiceConfig SUCCESS

    C:/>sc start wuauserv

    SERVICE_NAME: wuauserv        TYPE               : 20  WIN32_SHARE_PROCESS        STATE              : 2  START_PENDING                                (NOT_STOPPABLE,NOT_PAUSABLE,IGNORES_SHUTDOWN)        WIN32_EXIT_CODE    : 0  (0x0)        SERVICE_EXIT_CODE  : 0  (0x0)        CHECKPOINT         : 0x0        WAIT_HINT          : 0x7d0        PID                : 1156        FLAGS              :

    C:/>

     

     


    最新回复(0)